82302B

1/2 Ton Capacity
High Lift Wheel Dolly

Made in USA

INTENDED USE:

For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

82302B

FEATURES:

  • Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.
  • 7-1/2” of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum.
  • A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
  • The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
  • A hydraulic jack tilts the lift arms to match the angle of the spindle.
  • Safety chain provided to secure tires and wheels to the dolly.
  • Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

DIMENSIONS:

Lift Height  
Low 3"
High 41.25"
Lift Arms  
Width 24.25"
Length 21"
Tilt Angle -2° to +30°
Side to Side Adj.  
Left 3.25"
Right 4.25"
Overall Dimensions  
Length 45.75"
Width 43.75"
Height 62"
Shipping Weight 315 lbs.
   

 WARNING: Cancer & Reproductive Harm. www.P65Warnings.ca.gov